ust eng tr
okHOME
okPRODUCTS
okGALLERY
okCONTACT INFO
okCONTACT FORM

POWDER COATING BOOTHS
Powder coating booths are necessary for the system in order to recover high-cost powder paints and coaters and also avoid environmental pollution. Some solutions are offered for the recovery and recycling of the paint upon coupling various systems in the booths.

FILTERED POWDER COATING BOOTHS (CARTRIDGE TYPE)  

 

automatic type powder coating booth

manual powder coating booth

 

 

Filtered booths are the most practical and useful model among the powder coating booths. Powder particles moving by the airflow created by the suction fan and which can not adhere to the material are prevented to exit out upon filtering. Filters are cleaned manually by means of reverse explosion system during operation inside the cabin. The paint flaking off onto the booth base from the filter as a result of the sudden choke valve is sieved manually and collected in the hopper and re-absorbed from there by means of injector and transferred to the system. Filtered booths are the most proper system for recovering.

Technical Specifications
-Manufactured in modular design by means of 1,5mm and 2mm DKP sheet-iron of which the inner and outer surfaces are covered by electrostatic powder paint. It may preferably be manufactured by Galvanized sheet, PVC or Stainless steel material.
-Automatic sieve depot is available in the booth.
-The powder which is collected outside the filters can be reused.
-Booth is controlled by the control board located thereon.
-Available for manual and continuous operations

TABLE OF DIMENSIONS FOR STANDARD MANUFACTURING FILTERED CABINS

MODEL
INTERNAL DIMENSIONS (mm)
LENGHT
WIDTH
HEIGHT
TRANSITION HEIGHT
TRANSITION WIDTH
FKT-2
1.200
1.400
1.700
1.650
700
FKT-3
1.400
1.400
1.700
1.650
700
FKT-4
1.800
1.400
1.700
1.650
700
FKT-5
3.000
1.400
1.700
1.650
700
FKTİ-6
3.200
1.400
1.700
1.650
700
FKTİ-8
4.000
1.400
1.700
1.650
700
FKTİ-10
4.500
1.400
1.700
1.650
700
FKTİ-12
5.000
1.400
1.700
1.650
700

CYCLONE TYPE POWDER COATING BOOTHS  

powder coating cyclone

cyclone type powder coating booth

Bottom suction is made inside the booth by means of downward movement of the powder particles, which can not adhere to the material during painting process, as a result of the gravitational force. Base of the booth is inclined and a hopper is located along the cabin at the bottom, allowing the powder is collected there and absorbed by the cyclone. It is manufactured in proper types for one-side and two-side spray appliccation. Those types of booths are designed as single or double cyclone according to the method of application. This system provides an advantage during many color applications due to featuring rapid color change without an inventory cost.

Technical Specifications
- Manufactured in modular design by means of 1,5 mm and 2 mm DKP sheet-iron of which the inner and outer surfaces are covered by electrostatic powder paint. It may preferably be manufactured by Galvanized sheet, PVC or Stainless steel material.
- Booth is controlled by the control board located thereon.
- Available for manual and continuous operations

 

TABLE OF DIMENSIONS FOR STANDARD MANUFACTURING CYCLONE TYPE BOOTHS

MODEL
INTERNAL DIMENSIONS (mm)
LENGHT
WIDTH
HEIGHT
TRANSITION HEIGHT
TRANSITION WIDTH
SK-1
2.400
1.400
1.700
1.650
700
SK-2
3.400
1.400
1.700
1.650
700
SK-3
4.000
1.400
1.700
1.650
700
SK-4
4.500
1.400
1.700
1.650
700
SK-5
5.500
1.400
1.700
1.650
700

 
 
2008 İSTANBUL ELEKTROSTATİK LTD
Documents and files used in this site cannot be copied and used without permission.
Home I Products I References I Site Map I Contact Info I Email